14
English
Installation
Contact the
nearest service
center if the
projector displays
these symptoms.
Powering Off the Projector
1. Press the “ ” button on the remote control or
on the control panel to turn off the projector.
The following message will be displayed on the screen.
Press the “
” button again to confirm otherwise the
message will disappear after 10 seconds. When you press
the “
” button for the second time the system will shut
down and begin cooling.
2. The cooling cycle lasts 5 seconds, the POWER/STANDBY
LED will flash red. When the LED lights solid red the pro
-
jector is in standby mode.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has en-
tered standby mode. Once in standby mode, simply press “
” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
Warning Indicator
When the warning indicators (see below) come on,
the projector will automatically shutdown:
“LAMP” LED indicator is lit red and if “POWER/STANDBY”
indicator flashes red.
The cooling cycle lasts 5 seconds, the POWER/STANDBY
LED will flash red. When the LED lights solid red the pro
-
jector is in standby mode.
Unplug the power cord from the projector, wait for 30 seconds
and try again. If the warning indicator lights up again, please
contact your nearest service center for assistance.
