InFocus INF6501W, User Manual

Page: 10 / 45

Page 8
Setup
Mounting
This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this
product's specifications and follow the manufacturer installation instructions.
• Only use properly rated wall and stand mounting hardware that meet this product’s specifications and follow the manufacturer
installation instructions. The warranty does not cover any damage caused by use of improperly rated mounting hardware or from
improper installation.
• To prevent damage to the screen surface, carefully place your monitor face-down on a clean, cushioned surface.
• When mounting the monitor to a wall, metric 8 (12mm) screws must be used. Use spring washers to prevent the screws from
coming loose. In addition, the mounting interface should comply with the UL1678 standard in North America. The mounting
means should be strong enough to bear the weight of the monitor.
• Do not install the monitor in places subject to mechanical vibration.
• Do not place the monitor on an unstable surface, which could result in serious personal injuries and monitor damage. When
mounting the monitor to a stand, be sure to following the manufacturer’s instructions. Use only the mounting hardware recom-
mended by the manufacturer.
• WARNING: This monitor must be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the
machine may cause injury or death.
• If the monitor is installed against the wall, maintain a distance of at least 1.98” (5cm) between the monitor and the wall to pro-
vide adequate ventilation.
• Do not install or use the monitor near any heat sources such as radiators, heat registers, stoves, or other devices (including ampli-
fiers) that produce heat.
• Do not place the monitor in direct sunlight, humid, greasy or dusty places or in places where the monitor may come into contact
with rain, smoke or steam.