background image

4

Troubleshooting

If there is no picture or the picture is blank

 

If the power light is off

, make sure the power cord is connected and plugged 

into a live electrical outlet. 

If the power light is amber and not blinking

, press 

the 

power

 button. 

 

Check video source and cables. 

Make sure the video source (computer, DVD 

player, VCR, etc.) is turned on and cables are securely connected between the 
source and the projector. 

 

Make sure your computer's video port is enabled.

 Press the key combination 

that activates your laptop's external video port (see step       ). If there is still no 
image, restart your laptop. 

 

Press the Source button.

 You may need to press it several times to view the 

correct source.

 

Press the Auto Image button.

If "Signal out of range" is shown, or the picture looks bad

 

Press the Auto Image button.

 If that doesn't help (and the source is a computer), 

reduce your computer's display resolution or vertical refresh rate. 

If the replace lamp light is on

 

Turn the projector off and wait at least one minute, then turn it on again. If the 
replace lamp light turns on again, the lamp needs to be replaced. 

For lamp 

replacement instructions

, see the Reference Guide, which is on the included 

CD-ROM or can be downloaded at

If the high temperature light is on

 

Turn the projector off and remove anything that may be blocking the air vents 
on its side.

 Leave the projector off for at least one minute to let it cool before 

turning it on again. 

Important:

 Continuous operation at high temperature may 

reduce the lifetime of the lamp and/or projector. 

If the service required light is on

 

Turn the projector off and wait at least one minute, then turn it on again.

 If the 

service required light turns on again, the projector needs to be serviced. See 
below for service contact information. 

More troubleshooting options are in the Reference Guide

 

Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector. 

Keep out of the area under and around the projector when it is turned on. See the safety 
instructions booklet for more details.

 

source

The Reference Guide is on the included CD-ROM,

or download it at www.infocus.com/service

www.infocus.com/service

Summary of Contents for IN34









Reviews: