InFocus Genesis P130, Introduction Manual, Page: 12 / 82

12 InFocus Corporation — Introduction Guide - DLP Multimedia Projector
Safety symbols and descriptions
The following table lists the meaning of the safety symbols labeled on the projector, remote control, power cord
and cables.
No. Symbol Mark Standard / Description
1 IEC 60417 - Symbol No: 5009
Stand-by - to identify the button to place the device in to
Stand-by condition
2 IEC 60417 - Symbol No: 5002 Positioning of Cell and
identification of battery holder
3 IEC 62471-5:2005
As with any bright source, do not stare into the direct beam,
RG2 IEC 62471-5:2015
4 IEC 60417 - Symbol No. 5017
Earth
To identify an earth (ground) terminal in cases where neither the
symbol 5019 is explicitly required.
5 IEC 60417 - Symbol No. 5019 Protected Earth
To identify any terminal which is intended for connection to
an external conductor for protection against electric shock in
case of a fault, or the terminal of a protective earth (ground)
electrode.
6 ISO 7000 - Symbol 0434B
IEC 3864-B3.1
Caution
To identify general caution when using the product
7 IEC 60417
Caution Hot Surface
To indicate that the marked item can be hot and should not be
touched without taking care.
8 IEC 60417 Symbol No. 6042
ISO 3864-B3.1
Caution Risk of Electric Shock
To identify equipment that has risk of electric shock.
Safety symbols
RG 2