14
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Connecting a Video Player
1
If your video player uses a round, one-prong composite video
connector, you’ll need only the A/V cable that shipped with
the projector. (Refer to Figure 14 on page 16 to see the connec-
tor types.)
•
If your video player uses a round, four-prong S-video con-
nector, you’ll need an S-video cable in addition to the A/V
cable. If your video player uses a BNC connector, you’ll
need a BNC cable in addition to the A/V cable. The cables
are sold separately. (See “Optional Accessories” on
page 47.)
2
Plug the A/V cable’s yellow connector into the “video-out”
port on your video player. This port may be labeled “To Mon-
itor.”
•
If you’re using an S-video cable, connect it to the “s-video
out” connector on the video player. If you’re using a BNC
cable, connect it to the BNC connector on the video player
(Figure 12).
3
Plug the other yellow connector into the composite connector
on the back of the projector (labeled
under Video 2).
•
If you’re using S-video or BNC, plug the other end of the
cable into the “S-VID” or “BNC” connector on the projector
(Figure 12).
F
IGURE
12
Connecting the projector to a video player using an S-video cable and the audio con-
nectors on the standard A/V cable
A/V cable
S-video cable
Summary of Contents for CEILING MOUNT LP 1000 SERIES
Page 63: ......
