2
Features
User Guide
1
1) Camera Opening
2) Hook & Loop Velcro
3) Silicone Elastic Strap
4) Kickstand Elastic
5) Camera Opening
6) D-Rings
7) Keyboard Elastic
8) Hand Strap
9) ID Window
Installation
Before installation, make sure your Surface Pro Tablet is
separated from your keyboard and free of dust and dirt that
may interfere with the Velcro tabs.
Remove the clear backing from the adhesive Hook &
Loop Velcro strips(2) on the inside of your case. Lay your
Microsoft Surface Pro screen down on a soft, firm surface.
Align the camera cutout with the camera on the back of
your device and firmly press down, this will adhere the Loop
portion of the Velcro to the back of your device. Gently
seperate the case and the machine and allow the Velcro to
cure before continuing.
NOTE:
The Velcro Adhesive achieves full strength in 24
hours. It is recommended that you allow it to fully cure be-
fore using your device with the case.
1
5
2
2
3
6
6
7
8
9
4
4
