infobit iTrans DX-T-22, Quick Manual, Page: 1 / 2

iTrans DX-T-22
Quick Guide
1. Product Introduction
This product is applied to the audio system field to convert
the analog audio signal to Dante audio signal. Power
supply Ethernet (PoE) switch.
2. Product Feature
1. Function Introduction: Convert the received analog
audio signals to Dante network audio signals.
2. Input & Output : Support two analog audio signal
inputs, two Dante outputs.
3. Hardware interface type: Two XLR are used to input
analog audio signals; One RJ45 port is used to output
Dante network audio signal.
4. Technical Parameters
Model No. iTrans DX-T-22
Product Type Audio signal adapter
Function
Convert analog audio signal to
Dante network audio signal
output
3 pin XLR F/M
2
RJ45 Port 1
Analog audio interface XLR
Dante RJ45
Frequency response 20Hz to 20kHz (-/+0.5dB)
Maximum signal level
(balanced)
+18dBu / +4dBu / 0dBu
Dynamic range > 100dB
SNR (Signal to Noise Ratio)
> 100dB
THD (Total Harmonic Distortion)
< 0.01%
（
+4dBu
）
Power consumption <1W
Operating temperature
0-40
℃
Size (LxWxH) 652mm x 32mm x 22mm
Weight 0.2kg
4. Product Overview
5. Product Connect
1. Download and install the Dante Controller from
Audinate website ( www.audinate.com ).
2. Connect the device to the switch using Dante network
audio system with network cable.
3. The analog audio transmission device is connected
through the XLR interface.
4. Search for devices in Dante Controller software, Select
and open the devices to be configured. On the Routing
page, match the input row with the output column with
a custom check.
5.
Once set up and configured the audio routing between
audio device, the audio device will remember and save
the settings.
6. Do not spill any corrosive chemicals or liquids on or
near the equipment.