18Gbps HDMI+USB-C KVM Switcher KIT
5
⑦
ETHERNET
1 x RJ45, used for network passthrough transmission
⑧
FW
1 x Micro-USB, used for MCU firmware upgrade
Rear Panel
No. Name
Description
①
USB-C
1 x USB-C 3.0 input, support external 60W charging
②
HOST
1 x USB-B 3.0, connect to HOST devices such as laptops
③
HDMI IN
1 x HDMI input, connect to HOST devices such as laptops
④
HDMI OUT
1 x HDMI loop output
⑤
HDBT
1 x HDBT output, the green light is always on when the
signal is with HDCP, flashes when the input signal is without
HDCP; the yellow light is always on after the TX and RX are
connected;
⑥
AUDIO
1 x 5-pin balanced audio output, output audio de-embedding
⑦
Grommet
GR1: Correspond the USB-C
GR2: Conrrespond the HDMI
SM: Switch to the current source
BO: Print a black screen to all outputs.
⑧
RS232
LOCAL: Connect the control devices to control the
transmitter
PASS: Bidirectional passthrough transmission with Receiver
⑨
Upgrade
1 x Built-in short-handled buttons, press and hold for 3s to
enter the upgrade mode, and the power indicator flashes. At
this time, you can upgrade the firmware through the serial
port, and press the button again to exit the upgrade mode
⑩
TCP/IP
1 x RJ45, TCP/IP control
⑪
DC 24V
Connect DC24V5A power adapter
HDMI
AUDIO
HOST
L
R
DC 24V
HDMI
USB-C
TCP/IP
HDBT
INPUT
OUTPUT
R
S
2
3
2
Tx
Rx
LOCAL
PASS
Tx
Rx
SM
BO
GR 1
GR 2
SM
BO
60W
1
2
3
4
5
6
7
8
9
10
11
