21
9. Video Source Tab
iShare Plus supports firmware upgrade through Web UI and USB ports on the front panel.
To upgrade firmware through Web UI, see
section.
To upgrade firmware through USB port on the front panel, perform the following:
1. Name the upgrade file package
“
update.zip
”
.
2. Create a new folder named
“
upgrade
”
under the root directory of a FAT32 or NTFS Udisk. Place the
upgrade file in this folder.
3. Connect the Udisk to the switcher
’
s USB port. It takes about 1 minute for the switcher to read the
Udisk. If the switcher detects the upgrade file is a newer version, it will start to upgrade, and the LED
indicators on front panel -- VGA, HDMI 1-2 & USB-C LEDs will start blinking. When the upgrade
process is completed, the four LEDs will stop blinking and return to normal state.
Note:
Do not cut off power during the upgrade process.
If the switcher detects the upgrade file is not a newer version, it will not start upgrade.
If you want to perform force upgrade
, add the forcedeploy file to the
“
upgrade
”
folder. The switcher will
start to upgrade whether the version of upgrade file is newer or not. Therefore, please use this method
with caution.
Contact Us
United Kingdom
INFOBIT AV LTD.
+44 (0)7430 051848
Fifth Floor 3 Gower Street London
WC1E 6HA
Singapore
INFOBIT AV PTE. LTD.
+65 9711 9648
2 Venture Drive #11-31 Vision
Exchange Singapore 608526
China
INFOBIT AV LTD.
+86 135 5217 1787
Chaoyang, Beijing China
www.infobitav.com