What is content in package ?
Remote control’s functions
①Video conference camera * 1
②User’s manual * 1
③Expansion mics * 1-3
④Charging tray * 1-2
⑤Bracket and screws * 1
⑦Power supply of the camera * 1
⑧Power supply of the charging tray * 1-2
⑨USB - type C cable * 1-2
⑩Remote control (no battery) * 1
Note: If the remote control is not available, maybe the batteries ran out. Please
change the new batteries(AAA*2pcs) .
Speakerphone mute
6
Speakerphone mute
Volume up/down
7
“+” volume up; “-” volume down
Buttons
Functions
Camera functions’
menu
4
Camera functions’ menu (center)
EPTZ control (up, down, left, right)
Power on/off
1
Power on/off
Zoom out
2
Camera zoom out
Zoom in
3
Camera zoom in
Microphone mute
5
Microphone mute
4
1
7
6
2
5
3
Lens
DC IN 12V Power supply interface
Camera Scroll wheel
Adjust ±15 degrees of the lens
go up and down.
Functions LEDs indicator
The indicator lights up when using the device.
Functions of the buttons on the top
Microphone mute
2
Connection indicator
1
Speakerphone mute
3
Volume down
4
Volume up
5
Power on/off
6
Buttons
Functions
Power on/off
2
Press 3 seconds to power on/off
Copper ring
3
When using the charging tray, the charging
copper ring acts as the charging interface.Charging
copper ring contacts spring probe for charging
Mute Microphone
1
Microphone mute
Controls and Functions
BV40 Video Conference Camera with Expansion Microphone(s)
< Front View >
< Rear View >
< Wireless Expansion Microphones.Top View(left), bottom View(right) >
For connecting USB3.0 Cable
2
Power on/off
3
Copper ring
Mute Microphone
1
Orange LED lights
Microphone mute
2
All the mics mute
Orange LED lights
Speakerphone mute
3
Speakerphone mute
Blue LEDs decrease
progressively
Volume down
4
Volume down
Blue LEDs increase
progressively
Volume up
5
Volume up
Blue LED lights
Blue LED off
Press 3 seconds to power on
Press 3 seconds to power off
Power on/off
6
Orange LED lights
Blue LED flashes
Connection indicator
1
Connected to PC successfully via USB
Disconnected
Buttons
Indicator status
Functions
For LAN
( 4K )
Speakerphone mute
< Top View >
Red LED flashes
Low battery
Battery
Charging time Standby time Working time
VB40
2) The audio output of this device use the same USB interface with video and
supports the standard UAC protocol. All the software which supports the UAC
protocol can collect the audio of this device.
3) Daisy-chain max up to 3 wireless expansion microphones connect to main unit
via RF2.4G transmission. Each expansion microphone provides 3 meters pick up
range. To ensure the call quality and echo cancellation effect, please do not move
the expansion microphone after placing it on the table. At the same time,
expansion microphones need a distance at least 1 meter from the speaker.
4) The main unit has an internal auxiliary microphone for emergency use when
the expansion mics are out of power. Expansion mics are recommended for the
best call experience. When any expansion mic is turned on, the internal mic will
be automatically disabled.
2) Prompt tone ON/OFF
Prompt tone is turned on by default. Press and hold for 5 seconds to
turn ON/OFF.
3) Enable or disable the internal microphone
Press and hold for 5 seconds to enable or disable the internal mic
Combination Key Function
Pairing Wireless Microphones
Music Mode
microphone close to the main unit.
paired.
⑥ USB 3.0 cable 3M * 1
main unit
4) Remote upgrade mode
(This function needs the support of the manufacturer, please do not use it
under normal circumstances)
Press and hold for 5 seconds to exit the upgrade mode.
Press and hold for 5 seconds to enter remote upgrade mode, only the
orange indicator of Power button lights.