FIG 5
FIG 6
5. Locate the power cord included with your MP-3000 M
package.
[ FIG 5]
6. Insert the power cord into the Power jack located on the
back of the MP-3000 M player.
[FIG 6]
Plug the power
cord into your local power source (this could be a power
strip or outlet).
For Technical Support, call 1-800-373-8200 Option 2
7. Once the system is installed, you will need to refer to the
included
MP-3000 M Programming Guide
to program the
on-hold messages.
If you plug the USB drive into the unit without first
programming it, the screen on the unit will read “No
File.”
FIG 7
8.
FIG 7
shows what your MP-3000 M
should look like when running correctly.
There is no Power button on the unit. It
automatically turns on when you plug in
the unit with the power cord.
VOLUME knob is used to control the output level
of the stored messages. Volume up is clockwise,
volume down is counter-clockwise.
Speaker button.
Press to hear
messages playing.
Press again to turn
off speaker.
The STATUS indicator is a BLUE
LED that during normal operation will
be
solid
during playback. If there is a
problem with the drive, it is not
inserted or is empty, the LED will
blink
.
