ASSEMBLY
Assembly of the 14 Inch RGBW Ring Light Kit is broken down into 5 sections:
tripod, ring light, phone mount, microphone mount and camera mount.
SECTION 1: TRIPOD
1. Take the folded tripod out of the packaging (Fig. 1).
2. Loosen the base adjustment screw (Fig. 2).
3. Use your hands to gently pull the legs outwards from the centre shaft
(Fig. 3 & 4).
4. Adjust the legs until stabilising bars are parallel with the ground. Then
tighten the base adjustment screw.
5. Loosen the pole screws to extend to your desired height. Then tighten
once height is confirmed (Fig. 5 & 6).
INCLUDED
1 x 8 Inch ring light
1 x Camera mount
1 x Phone mount
1 x Microphone mount
1 x Dual phone bracket
Stabilising bars
