8
6th Floor of Block A, Changbai Technology Park, No.8
Zhenzhu RD, Xinzhan General Pilot Zone
China, Anhui, Hefei
，
230012
0551-6282982
6. Operation System
6.1 Power on / Power off
In shutdown mode, long press Power (4) button for 3s to start up Xclip and the
startup image appears on the display screen at the same time. After 6s, the device is
started.
Long press
Power (12)
button for about 5s to shut down the device.
6.2 Standby Mode
Enter/exit the standby mode with short pressing the
Power (12)
button for power
saving.
6.3 Status bar
The status bar is located at the bottom of the screen, which shows information such
as image mode, screen lightness level, bluetooth activated, E-zoom, video out
activated, battery status.
6.4 Shortcut Menu
In the normal display mode, short press
M (13)
button to switch the order of "no
menu - screen brightness - image mode - electronic zoom - exit shortcut menu", and
by pressing
Power (12)
button and the
C (14)
key to adjust the parameters of each
function. Shortcut menu interface is as shown in fig. 6-1.
● Screen lightness
：
1~4 lightness level;
● Image mode:
W (White hot), B (Black hot), R (Red hot), C (pseudo color);
● E-zoom (only for monocular):
×1
、
×2
、
×4.
