14
6th Floor of Block A, Changbai Technology Park, No.8
Zhenzhu RD, Xinzhan General Pilot Zone
China, Anhui, Hefei
，
230012
0551-6282982
Pressing
M (13)
button to switch the orientation of X-axis (left-right) and
Y-axis (up-down);
Short press
Power (12)
button or
C (14)
button to change the position of
screen and long pressing to start quick shift.
After completing calibration, long press
M (13)
button to save and exit the
calibration interface.
6.9 Stadiametric Rangefinder (Only for Monocular)
Stadiametric rangefinder is only for monocular mode which allows the user to
estimate approximate distance to an object of known size.
Fig. 6-7 Stadiametric rangefinder interface
In normal display mode, press the
M (13)
button and
C (14)
button for 3s at the
same time to enter the stadiametric rangefinder interface (fig. 6-7).
You will see on the display: two measurement bars, icons of three reference
objects and respective distances foe the three objects.
There are three pre-set reference objects:
Hare
- height 0.2m
Wild boar
- height 0.8m
Deer
- height 1.7m
