11
6th Floor of Block A, Changbai Technology Park, No.8
Zhenzhu RD, Xinzhan General Pilot Zone
China, Anhui, Hefei
，
230012
0551-6282982
Battery
Type
3V/3.7V
3.7v is selected for rechargeable
batteries, and 3V is for normal dry
batteries.
——
Blind
pixel
correction
Calibrate the
blind pixels
on the image
Refer to 6.6
Blind pixel
calibration
interface
（
fig.
6-3
）
Factory
reset
Restore
factory state
Y: Confirm
，
N
：
Cancel
Then long press M button to save
and exit.
——
6.6 Blind Pixel Calibration
Under the advanced menu, select the blind element calibration option and
press
M (5)
button to enter the blind pixel correction interface (fig.6-3). A
cross cursor will appear in the center of the screen.
And then, move the cursor up-down or left-right to select the blind pixel
through the
Power (4)
button and
C (6)
button. And press
M (5)
button to
switch the orientation of X-axis (left-right) and Y-axis (up-down);
After selecting the blind pixel, press
Power (4)
and
C (6)
button at the same
time to correct the blind pixels;
Repeat the above operations to continue selecting blind pixel, and the
number of corrected blind pixel is shown on the status bar at the bottom of
the screen;
After the correction is completed, long press
M (5)
button to exit the blind
pixel correction.
