V1.0.0
12
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
The installation steps of the waterproof set for the network port are as follows.
Step 1 Pass the network cable through the fastening nut and the main body of the
waterproof set in turn.
Step 2 Break off the waterproof rubber ring and put it on the network cable between
the main body of the waterproof set and the fastening nut.
Step 3 Put the O-shaped rubber ring and the network cable into the network port.
Figure 2.8
Install Cable
Step 4 Align the notch of the mesh with the buckle of the main body of the waterproof
set, put the main body of the waterproof set into the end of the network port, and
tighten it clockwise.
Step 5 Put the rubber ring into the main body of the waterproof set.
Step 6 Turn the tightening nut clockwise to compress the waterproof glue.
Figure 2.9
Finished Installation
