Dual-spectrum Network Bullet Camera User Manual
18
2.3.3.3PTZ Protocol
Connect the RS485 interface to the device with PTZ, select “PTZ Protocol”, the
setting page will be unfolded beneath, see the following figure:
Figure 2.22
PTZ Protocol Page
Check “Update PTZ Protocol”, click “Select File(*.ptz)” to select the PTZ
protocol which needs to be updated, then click “ok” to update PTZ protocol; set
the address, baud rate, data bit, start bit and check bit of the device the same as
the PTZ, the setting can be copied to all channels or a certain channel (except
PTZ protocol). Enter into the page of “real monitoring” and operate the
following PTZ function buttons.
Figure 2.23
PTZ Function Button
