Precise Body Temperature Measurement Thermal Camera
责任
进取
敏行
合作
400-998-3088 www.IRaytek.com
IRay sensing
®
All Insight
- 9 -
Gigabit Port
2
）
Plug the power cable and network cable into the ports of the camera and the RJ45 interface
of the network, the other end of the network cable is connected to the computer network port, and the
other end of the power cable is connected to a DC power adaptor (12V is recommended).
Figure 6 Interface of camera
3) Power up the power adaptor and power up the camera. The sound of the shutter action is
heard immediately after power-on, indicating that the camera has been powered on successfully.
4
）
After the power on 1 minute, run the web client or PC client , connect the device;
5
）
In order to ensure the accuracy of temperature measurement, the thermal camera needs to be
stable for 40 minutes after powering on, and then start the temperature monitoring
Notes:
Following picture shows the demension of connector which is used to provide power.
It provides a reference to buy a matched DC power adaptor .
Power supply
