background image

4.1.2.

 Product running mode

a. Auto mode

   Robot won't stop cleaning until the 
battery runs out. It will move around 
walls, barriers and stairs automatically. 
Once low clearance dark area is detected, 
the robot will clean it for 5 minutes 
with high cleaning efficiency. Working 
path is as shown in the picture 1.

b. Low clearance dark area mode

   In low clearance dark area mode, the 
robot will clean continuously for 15 
minutes and move around walls, barriers 
and stairs automatically. Working path 
is as shown in the picture 2.

If the robot is lifted up while it is cleaning, the robot's wheel will stop 
immediately, and the vacuum motor will stop after 3 seconds. 

Press the button during the working process, the robot's wheel will stop 
immediately, and the vacuum motor will stop after 3 seconds.

Low clearance dark area mode

Indicator flashes once 

with one beep

with one beep

with one beep

with one beep

with one beep

with one beep

with one beep

with one beep

dust bin

If the robot is working in low clearance dark area, it will leave low clearance 
dark area immediately once it detects the low battery status.
After the robot runs out of power, the red indicator will flash. The robot will 
beep every 10 seconds for 10 minutes in order help the user locate the robot.

If the robot stops working, press and hold the button for 5 seconds to turn off 
the robot.

Blue indicator stays on

Once the robot is 

stay on.

Summary of Contents for Hovo mini









Reviews: