Functions Introduction of Remote Control:
SPEED selection: press “SPEED” button on the remote control, you can
choose fast or slow speed.
fast speed
slow speed
TIMER (Setting up clock)
Press “
TIMER
” button first and then press
button
to move the blink
ing
digit
on the
remote
control
screen to
switch
between
hour, minute &
"
day
of week" sections
(as shown on Pic 1)
Press
buttons to change the
value
and set
up
hour, minute
&
day of
week respectively.
★
Tip: During the setting, press
button to quit; press
“
TIMER
” button to save the current setting.
SET (pre-set cleaning):
A: Pre-set time
Press “SET” button first and then press
the blinking digit on remote control screen
the remote control will switch among hour, minute & weekday (as shown on Pic 2)
Press
to change the value and schedule
a idea time that you want the machine work.
B: Pre-set weekday:
In “day of week” section, press "OK” to select the day.
"
",
under it.
Press " ALL" button to select all days of the week
, press it again to clear
all
.
★
Tip: During the setting, press the
to exit (not save setting); press “SET” to save current
setting.
FULL GO FUNCTION
1.Press the “SET” button, the screen shows a shinning spot
,then press the “STOP”
button, you can see “
”
displaying with the first F flashing, press again the “SET” to
stop flashing which indicates FULL GO function is activated, so the machine can automatically
clean when has been fully charged.
2. To cancel the FULL GO function, first press the SET button to see “ ”
displaying
on the screen with the first “F” flashing,then press STOP and after you
again, the FULL GO function is canceled.
press the SET button
★
Tip:: hen the FULL GO function is set, the pre-setting function is unavailable.
Pic1
Pic2
W
SET (Set up cleaning schedule):
A: Set cleaning time (hours & minutes):
will switch between hour, minute &“day of week” sections (as shown on Pic 2).
a time that you want the unit to start cleaning.
B: Set cleaning day(s) of week:
The selected day will have a “bar”
“FULL CHARGE& GO” FUNCTION
1. Press “SET” button, remote control screen will show a blinking digit . Press “STOP” and
you will see “ ”displayed with the first letter “F” blinking. Press “SET” again it will
stop blinking. This indicates that “FULL CHARGE& GO” function has been activated. The cleaner
will automatically start
cleaning once its battery has been fully charged on the charging station.
2. To cancel the “FULL CHARGE& GO” setting, first press SET button to have “ ” displayed
on remote control screen with first letter “F” blinking, then press STOP. Now, press SET button
again and
the “FULL CHARGE& GO” setting is cancelled.
★
Tip:: When “FULL CHARGE& GO” function is set, the scheduled cleaning function will NOT
WORK.
Summary of Contents for Hovo 510
Page 1: ...Model No Hovo 510 ...