CleanMate 365
CleanMate 365
Cleaning the Rolling Brush
Hair and other stringy items can get caught in the rolling brush over time.
1.Make sure the power to the unit is turned off.
2.Turn the QQ-2 upside-down and place it on a flat surface with the back of the
unit facing you.
3.Remove the Rolling Brush from its compartment by grasping the left side of the
Rolling Brush, and sliding it toward the right.
4.Lift the free end of the Rolling Brush out of the compartment, then slide the
Rolling Brush to the left, freeing it from the flexible insert.
5.Manually remove any hair, string or other objects from the rolling brush to
ensure proper performance of the unit.
6.With the Rolling Brush removed, loosen any dirt that has accumulated in the
Rolling Brush compartment with a brush, then dump the dirt into a trash can.
7.Re-install the rolling brush following the steps outlined in Rolling Brush
Installation and Removal
Vacuum Entry
Side Brush
Tip#2
36cm
Adjust the distance between furniture, walls and other objects to be
at least 36 cm (14 in).
Clean Mate 365
Tip#1: Clear the area where the QQ-2 is to clean of any items
can be easily knocked over or caught in the Rolling or Side
Brushes.
In the area where the QQ-2 operates, it
might knock over items such as vases,
glasses, or lamps.
In order to provide the QQ-2 a space
for fast and safe cleaning, please
remove small items from the area
before operating.
Tip#3
Do not let the loose edges of rugs, drapes, table cloths, etc to get caught
in the QQ-2. Roll under the loose edges of rugs and make sure that any
table cloths, drapes, bedding etc do not hang down to the floor.
When the QQ-2 is cleaning rugs,
fold under the edges of the rug.
Remove plastic bags and leftover long-
shaped garbage
Clean Mate 365
QQ-1
QQ-2 Useful Tips
QQ-2 Useful Tips
CleanMate 365
CleanMate 365
Cleaning and Maintenance
Cleaning and Maintenance
16
17
