INFINOVO MEDICAL i3, Operator'S Manual

Page: 24 / 44

19
4.Do not take out the transmitter when the sensor base is
attached to the skin.
6.3 Start the sensor
The steps to start the sensor electrode are as follows:
1.In the main menu, click [Start sensor], a prompt dialog
box will pop up; prompt to enter the sensor batch number.
2.Enter the sensor lot number and click the [OK] button
in the dialog box to start the sensor electrode.
3.After the sensor is successfully started, the main menu
[Start sensor] will change to [Stop sensor ] and display "Sensor
is started". The sensor then enters the polarization countdown.
The prompt message is displayed in the main interface and the
remaining polarization time is displayed in the progress bar.
Figure 22 Polarization countdown
4.After the sensor polarization is completed, a dialog box
on the main interface of the App pops up to remind the user
"please input reference blood glucose". After the reference
blood glucose is input, the App starts to display the blood
glucose reading.
During the process of sensor polarization, the App will
not display the blood glucose readings and the trend curves
until the first reference blood glucose is input.
7 Reference blood glucose
The reference blood glucose is the reading obtained by
measuring the fingertip blood sample with a blood glucose
meter. The blood glucose readings are calibrated by adding
reference glucose to the App.