21
factory default settings.
There is time prompt in the web page during reset. After reset, it will skip to
new web page.
If current IP unchanged, you can access web page directly. If IP address resets
to 192.168.1.100, you can’t access web page. Then, you have to set PC’s IP
address to 192.168.1 section, such as 192.168.1.25. After that, access web page
to change camera’s IP address and save, PC’s IP address will restore to the
corresponding section.
Note:
1. To avoid error happens, the operation of online reset function should be
performed under qualified personnel’s guide.
2. Default IP address is 192.168.1.100, and default subnet mask is
255.255.255.0.
3. Do not power off during reset, or else the reset will fail.
Online Reboot
Click “Reboot” button, the dialog box
Ā
This operation will take 60 seconds,
are you sure to continue
˛ā
pop up. Click “OK” and the system will restart.
There is time prompt in the web page during reboot. After reboot, it will skip to
new web page.
Note:
Available only for the super user.