6
6. MOUNTING THE CAMERA
When mounting the camera on fixer, pan/tilt, etc., use 1/4-20UNC screw and
the camera-mounting screw hole located on the camera-mounting bracket. The
camera-mounting bracket can be mounted on the top or at the bottom of the
camera. See the figure below:
Locating hole
Camera-mounting screw hole
Camera-mounting bracket
fixing screw hole
Camera-mounting bracket
Note:
z
When installing the unit on a bracket, make sure to choose the suitable
position that can support the weight of the camera and the bracket in years and
fix them properly.
z
Exercise maximum caution when installing the unit to the wall or ceiling.
You should not engage in the installation work yourself. Ask a professional to
do the job, since the fall of the unit can result in injuries and accidents.
z
When installing the unit on a fixer, turn table, etc., make sure to install it
firmly using a mounting hole provided on the mounting bracket to prevent fall.
z
As a failsafe against falling, attach the unit by chain, wire cable or other
safety restraint to an appropriate anchor point.