Infinity NV28 Owner'S Manual Download Page 4

3

www.infinityvac.com

English

Cyclonic Chamber/Dust Cup/Filters:

Before turning on the vacuum:

•  Make sure that dust cup, cyclonic chamber and all filters are in place after 
 routine 

maintenance.

•  Make sure that all components and filters are thoroughly dry after routine 
 cleaning.

•  Only use filters and accessories provided by EURO-PRO Operating LLC
  [Failure to do so will void the warranty.]

General Cleaning

:

DO NOT

 run the vacuum over large-sized objects.

DO NOT

 pick up hard or sharp objects such as glass, nails, screws or coins that 

could damage the vacuum cleaner.

DO NOT

 pick up smoking or burning objects such as hot coals, cigarette butts, or 

matches.

DO NOT

 pick up flammable or combustible materials such as lighter fluid, 

gasoline, kerosene or use in areas where they may be present.

DO NOT

 pick up toxic solutions such as chlorine bleach, ammonia, or drain 

cleaner.

DO NOT

 use in an enclosed space where vapors are present from paint, paint

thinner, moth-proofing substances, flammable dust or other explosive or toxic 
materials.

DO NOT

 vacuum up any liquids.

DO NOT

 immerse vacuum cleaner in water or other liquids.

DO NOT

 use outdoors or on wet surfaces; use only on dry surfaces.

Use extra care when cleaning on stairs.

Summary of Contents for NV28




















Reviews: