56 | ISE-XH30(36)ZWDN650 FD
ISE-XH30(36)ZWDN650 FD | 57
ENG
M5 Standard/Security Screw (supplied)
•
Screws and Screw Anchors for fixing the Corner Thin/Wide Box (not supplied)
•
TOOLS NEEDED:
Tool for drilling
•
Tool for screwing
•
Follow the steps below to mount the Dome Camera with the Corner Thin/Wide Box and Standard/Compact Pendent
Mount.
Make a cable entry hole on the wall to recess the cable(s).
•
Fix the Corner Thin/Wide Box on the corner of the wall with proper screws and screw anchors. Then run the
•
cable(s) through the hole on the Corner Mounting Plate with the Data Cable’s 22-pin cable coming out.
Fasten the Standard/Compact Pendent Mount onto the Corner Thin/Wide Box with the supplied screws and
•
washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming out
of the Pendent Mount’s outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
•
Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount Kit to the Standard/Compact
•
Pendent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
Connect the cable(s) to the Dome Camera.
•
Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
•
Corner Box Mounting: Corner Thin/Wide Box + Standard/Compact Pendent
Mount + Outdoor Mount Kit
DOME CAMERA INSTALLATION
ITEMS NEEDED:
Dome Camera
•
Outdoor Mount Kit (supplied)
•
Data Cable (supplied)
•
Ethernet Cable (network Dome Camera)
•
Standard/Compact Pendent Mount and equipped items (optional accessory)
•
Pole Thin/Wide Direct Mounting (optional accessory)
•
Waterproof Rubber (supplied)
•
M5 Standard/Security Screw (supplied)
•
Stainless Steel Straps for fixing the Pole Thin/Wide Direct Mounting (optional accessory)
•
TOOLS NEEDED:
Stainless Strap Cutter
•
Tool for screwing
•
Follow the steps below to mount the Dome Camera with the Pole Thin/Wide Direct Mounting and Standard/Compact
Pendent Mount.
Fasten the Pole Thin/Wide Direct Mounting on a pole with equipped stainless straps.
•
Run the cable(s) through the hole on the Pole Thin/Wide Direct Mounting with the Data Cable’s 22-pin cable
•
coming out.
Fasten the Standard/Compact Pendent Mount onto the Pole Thin/Wide Direct Mounting with the supplied screws
•
and washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming
out of the Pendent Mount’s outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
•
Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount Kit to the Standard/Compact
•
Pendent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
Connect the cable(s) to the Dome Camera.
•
Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
•
7.6.1
POLE THIN/WIDE DIRECT MOUNTING
7.6
POLE MOUNT
Pole Direct Mounting: Pole Thin/Wide Direct Mo Standard/Compact
Pendent Mount + Outdoor Mount Kit
DOME CAMERA INSTALLATION
Summary of Contents for ISE-XH30/36ZWDN650 FD
Page 35: ...www infinity cctv com ...
