16 | IPB-TDN540 SLHP
IPB-TDN540 SLHP | 17
ENG
3.5
SETUP
3.6
RESETTING TO THE FACTORY DEFAULT SETTINGS
3.7
MORE INFORMATION
This section describes how to configure the network
camera, and is intended for product Administrators,
who have unrestricted access to all the Setup tools;
and Operators, who have access to the settings for
Basic, Live View, Video & Image, Audio, Event, and
System Configuration.
You can configure the network camera by clicking
Setup in the top right-hand corner of the Live View
page. Click on this page to access the online help that
explains the setup tools.
When accessing the Network Camera for the first time,
the “Admin Password” dialog appears. Enter your
admin name and password, set by the administrator.
If the password is lost, the video encoder must be
reset to the factory default settings.
To reset the Network Camera to the original factory settings, go to the Setup>System>Maintenance web page or use
the control button on the network camera, as described below:
Follow the instructions below to reset the Network Camera to the factory default settings using the Reset Button.
Switch off the Network Camera by disconnecting the power adapter.
•
Press and hold the Control Button with a straightened paperclip while reconnecting the power.
•
Keep the Control button pressed until the Status and Power indicator blink.
•
Release the Control Button.
•
When the Power Indicator changes to Green (may take up to 1 minute), the process is complete and the network
•
video transmitter has been reset.
The transmitter resets to factory defaults and restarts after completing the factory reset.
•
CAUTION: When performing a Factory Reset, you will lose any settings you have saved.
For more information, please see the Network Camera User’s Manual, which is available on the CD included in this
package.
OPERATION
Summary of Contents for IPB-TDN540 SLHP
Page 11: ...www infinity cctv com ...
