background image

Power

 -1
-2
-3
-4
-5
-6
-7

-8

-9

-10
-11
-13
-15
-18

 

U-R

 Batt

from the first (i.e., direct) sound. The ears don’t ignore these
differences; they perceive them as coloration, or as sound quality
that’s been degraded. The Intermezzo 4.1t has been carefully
designed to maintain a directional pattern that is similar at every
important angle, on and off axis.The positive result is that both
direct and reflected sounds arriving at the listeners’ ears have
similar timbral signatures.

Amplifier

BASH is an amplifier-power-supply technology that increases
efficiency by reducing power dissipation in the output section. The
BASH topology uses a high-efficiency, fast-response, switch-mode
power supply that provides the main voltage rails for a linear
Class-AB amplifier. By varying the output of the power supply with
the audio signal being amplified, a constant voltage drop across
the output transistors of the linear amplifier can be maintained.
This means that the power dissipation in the output transistors is
greatly reduced.

The result is an extremely efficient audio amplifier that does not
compromise audio performance.

Completing the Experience

The technology and performance that make the Infinity Intermezzo
4.1t loudspeakers ideal for music listening also make them the
perfect digital multichannel loudspeaker system. To complete a
home-theater system, Infinity has designed, to the same precise
standards as the Intermezzo 4.1t, a matching 3-way center-channel
loudspeaker, the Intermezzo 3.5c. In addition, Intermezzo 2.6
bookshelf loudspeakers are available for use as full-range
surround channels.

We hope you enjoyed this brief introduction to the technology of the
Intermezzo 4.1t loudspeaker system. If you would like to further
explore the technology and design of the Intermezzo loudspeaker
system, please ask your Infinity dealer for the C.M.M.D. and
R.A.B.O.S. White Papers.The White Papers can also be downloaded
from Infinity’s Web site at www.infinitysystems.com.

Unpacking the Product

Finish unpacking the speakers and check the contents. If you
suspect damage from transit, report it immediately to your dealer
and/or delivery service. Keep the shipping carton and packing
materials for future use.

Included Accessories . . .

R.A.B.O.S. Kit (1) (Included with Left Subwoofer Only)

Sound-Level Meter

R.A.B.O.S. Test CD

Graph Templates

Bandwidth  Selector

Adjustment Key

Grilles (2)

Decorative
Side Panels
(2)

AC Cord

2

INTERMEZZO 4.1t

Summary of Contents for Intermezzo 4.1t





























Reviews: