Infinity IF14, Instruction Manual

Page: 2 / 32

SAFETY PRECAUTIONS
Please read this instruction manual carefully before assembling and operating this model.
• This product is an authentic radio controlled model, not a toy.
• To enjoy this model to the fullest, properly assemble the model before operating it, perform maintenance after
each operating session, and replace some parts with optional parts.
• Improper usage of rechargeable batteries may make the electric current too high, which may cause heat, liquid
leakage, and or fire. Follow the battery and charger instruction manuals and use both items safely.
In order to operate the model safely, adhere to following instructions. Hear are some possibilities of
significant damage to life and or body, if the following explanation.
• Before you start assembling this model, read this instruction manual thoroughly. If you are not used to
assembling a model, seek advice from people who have enough experience in assembling models and
assemble this model correctly.
• This product includes many small or sharp parts, so be careful with them and keep them out of the reach
of small children.
• All tools including knives, pliers and drivers require careful handling to avoid injury.
• Painting must be done only in a well-ventilated area.
• With weak or dry batteries, the radio will not be able to control the model and the model may become out
of control and cause a serious accident. Always be aware how much power is left in radio batteries and
charge or replace them with new ones if necessary.
• Don’t operate the model on anything except the track designed exclusively for it.
• Be sure that you are not operating this model at a place where there is another model running at the
same frequency as yours. Failure to do so will cause the models to lose control.
• When the model is moving strangely, stop the model immediately and find out the reason. Don't operate
the model again until the problem is solved. To continue operating the model without solving the problem
may lead to further trouble or unforeseen accidents!
• Don't put fingers or any objects inside the rotating or moving parts!
• Always operate the model attached with a body shell (not included in the kit).
• Check all screws and nuts on a regular basis for looseness.
• To avoid damage, don't install any optional parts not made by INFINITY in this model or modify the model.
WARNING! PROHIBITED
ITEMS REQUIRED FOR OPERATION TOOLS REQUIRED
1. Transmitter and Receiver (2ch)
2. Steering Servo (Low-Profile recommended)
3. Speed Controller
4. 540 size Motor
5. LiPo Battery (7.4V, Hard plastic case)
6. LiPo Battery Charger
7. Tires, Wheels and Inserts for 1/10 Touring car.
8. 190mm Body Shell
9. Polycarbonate Paint
10. Fibre Tape
11. 64 Pitch Pinion Gear
12. Shock & Diff Silicone Oils
13. Graphite Grease
1. Hex Wrenches (1.5mm / 2.0mm / 2.5mm)
2. Box Driver 7.0mm
3. Needle Nose Pliers
4. Nippers for plastic parts
5. Sharp Hobby Knifes
6. Scissors
7. Turnbuckle wrench (4.0mm)
8. Body Reamer
9. Pin vise 2.6mm
2