Infinity IB-16R, User Manual

Page: 21 / 44

20
Ordercode: 41532
Infinity iB-16R
04) Once you have selected the desired mode, press the button to proceed to edition.
05) Press the buttons to change the value from NO to YES.
06) Two menus have different options to the regular, YES or NO function:
 Pan Angle: 540°, 360°, 180°
 Tilt Angle: 270°, 180°, 90°
3.1. Lamp settings
With this menu you can set the lamp settings.
01) Press the buttons to select LAMP SETTINGS and press the button to open the menu.
02) You can now adjust the following options:
 ON/OFF (Set whether the lamp is ON/OFF, on start-up)
 STATE/POWER ON (Set whether the lamp is ON, once electrical power is received)
 OFF VIA DMX (Switch the lamp ON via DMX)
 ON IF DMX ON (The lamp is ON when a DMX signal is received)
 OFF IF DMX OFF (The lamp is OFF when no DMX signal is received)
 IGNITION DELAY (0-255, Lamp trigger delay)
 LOW POWER DELAY (0-255)
 RESET LAMP TIME (YES/NO)
03) Once you have chosen the desired option, press the button to enter edition mode.
04) Press the buttons to select YES or NO and press the button again, to confirm.
3.2. Maintenance Timer
With this menu you can reset the device’s counters.
01) Press the buttons to select MAINTENANCE TIMER and press the button to open the
menu.
02) Press the buttons to choose one of the 2 options:
 INTERVAL (0-250, maintenance interval)
 REMAIN TIME (NO-RESET, countdown)
03) If you select INTERVAL, press the button to open the selection menu.
04) Press the buttons to set the maintenance interval. The adjustment range is between 0-250.
05) Press the button to confirm.
06) If you select REMAIN TIME, press the button to open the selection menu.
07) Press the buttons to set the REMAIN TIME to No/Reset.
08) Press the button to confirm.