INFINITY Micro Component Home Cinema System HCS-1
Troubleshooting
If there is no sound
from any of the
speakers, check the
following:
l
Receiver/amplifier is on
and a source is playing.
l
Powered subwoofer is
plugged in and is either
in the “On” or “Auto”
position.
l
Check all wires and
connections between
receiver/amplifier and
speakers. make sure all
wires are connected.
Make sure none of the
speaker wires are
frayed, cut or punctured.
l
Review proper
operation of your
receiver/amplifier.
If there is no sound
coming from one
speaker, check the
following:
l
Check the “Balance”
control on your
receiver/amplifier.
l
Check all wires and
connections between
receiver/amplifier and
speakers. Make sure all
subwoofer is plugged
into an active electrical
outlet.
l
Powered subwoofer is
plugged in and is either
in the “On” or “Auto”
position.
If there is no sound
from the surround
speakers, check the
following:
l
Check all wires and
connections between
receiver/amplifier and
speakers. Make sure all
wires are connected.
Make sure none of the
speaker wires are
frayed, cut or puntured.
l
Review proper
operation of your
receiver/amplifier ant its
surround sound
features.
l
Make sure the movie or
TV show you are
watching is recorded in
Dolby surround. If it is
not, check to see if your
receiver/amplifier has
other surround modes
you may use.
wires are connected.
Make sure none of the
speaker wires are
frayed, cut or puntured.
If the system plays at
low volumes but shuts
off as volume is
increased, check the
following:
l
Check all wires and
connections between
receiver/amplifier and
speakers. Make sure all
wires are connected.
Make sure none of the
speaker wires are
frayed, cut or puntured.
l
If more than one pair of
main speakers is being
used, check the
minimum impedance
requirements of your
receiver/amplifier.
If there is low bass
output, check the
following:
l
Make sure the
connections to the left
and right “Speaker
Inputs” have the correct
polarity (+ and -).
l
Make sure that the
Infinity Systems continually strive to update and improve existing products, as well as create new ones. The
specifications and construction details in this and related publications are therefore subject to change without notice.
All rights reserved.
INFINITY Micro Component Home Cinema System HCS-1
AUDIO INPUT ONLY
ALWAYS
use INFINITY audio
connector cables for connection of
satellites to your AV-amplifier.
NEVER
attempt to connect other
electrical devices, transformers, etc.
In doing so, damage will result.
