Infinity Evoke, User Manual

Page: 9 / 14

Don’t use chair in direct sunlight or
near a heating appliance to avoid
deterioration of the upholstery.
Please use chair on a flat surface to
avoid any unexpected behavior of
chair, or damage to chair.
Check area around chair before use.
Check around the back and front of the
chair to make sure no people, pets, or
other objects are in range of chair.
(1) Clean dust from plug and cord (using
a dry cloth).
(2) Check there is no damage to cord
anywhere.
At least 4 inches from wall.
At least 12 inches from front of chair.
(1) Bind the cables and remote and put
them in the seat to avoid damage when
moving the chair.
(2) Do not drop the chair at any time.
Shock may damage the electronics.
(3) Don’t use the castor if the floor is
wooden or other easily scratched
material. Use 2 or more people to
lift the chair.
(4) Make sure the chair is unplugged
before moving. Make sure the chair
is in full upright position.
Computer controlled back scan.
If the computer and massage rollers
can’t get a good scan, the chair will
default to the highest position.
Right Position: Your back
is on the chair back, your
head is on the pillow.
The remote control gives
a “beep” sound after back
scan is complete.
If micro-adjustment is needed, just press
up/down on the remote control.
Please follow instructions for best scan,
this will give you the best massage.
Because the chair is heavy, it can
cause damage to flooring. Please
put a blanket or carpet
piece under the
chair to protect
the floor.