Infinity Entra Point Five Owner'S Manual Download Page 4

O

PERATION

Surround Modes

When using the Entra Point Five in a Dolby* Pro Logic* home
theater system, make sure the receiver’s center channel mode 
is set to “Normal.” When using the system in a Dolby Digital 
or DTS

®

home theater system, make sure all speakers are set 

to “Small”.

Some Dolby Digital-equipped receivers/processors offer different
setup options for each source or surround mode, e.g., CD-stereo,
videotape, Dolby, Pro Logic. In each case, follow your equipment’s
instructions to ensure that the subwoofer (if you have one) 
output is turned on and that the speakers are set to “Small” in
each mode.

The enclosures may be cleaned using a soft cloth, dampened
with water only, to remove fingerprints or to wipe off dust.

The grilles may be gently vacuumed. Stains may be removed
with an aerosol cleaner, following its instructions. Do not use
any solvents on the grille.

All wiring connections should be inspected and cleaned or
remade periodically.The frequency of maintenance depends on
the metals involved in the connections, atmospheric conditions,
and other factors, but once per year is the minimum.

If a problem occurs, make sure that all connections are properly
made and clean. If a problem exists in one loudspeaker, reverse
the connection wires to the left and right system. If the problem
remains in the same speaker, then the fault is with the loud-
speaker. If the problem appears in the opposite speaker, the
cause is in another component or cable. In the event that your
Entra Point Five ever needs service, contact your local Infinity
dealer or Infinity directly at 1-800-553-3332 (only in USA) or
www.infinitysystems.com for a service center near you.

M

AINTENANCE AND

S

ERVICE

Entra Point Five

Frequency Range:

100Hz – 20,000Hz (±3dB)

Recommended
Amplifier Power Range:

15 – 100 watts

Sensitivity:

86dB

(2.83V @ 1 meter)

Nominal Impedance:

8

Crossover Frequency:

2500Hz, 24dB/Octave

Midrange Driver(s):

4" C.M.M.D.,
magnetically shielded

High-Frequency Driver:

3/4" C.M.M.D.,
magnetically shielded

Dimensions (H x W x D):

7-5/8" x 5-5/8" x 5-1/2"

(194mm x 143mm x 140mm)

Weight:

6 lb (2.7kg)

Infinity continually strives to update and improve existing products, as well 

as create new ones.The specifications and construction details in this and 

related Infinity publications are therefore subject to change without notice.

S

PECIFICATIONS

Declaration of Conformity

We,  Harman Consumer International

2, route de Tours
72500 Chateau-du-Loir
France

declare in own responsibility, that the product described in this

owner’s manual is in compliance with technical standards: 

EN 50081-1:1992

EN 50082-1:1997

Robin Marshall

Harman Consumer International

Chateau-du-Loir, France. 4/02

© 2002 Infinity Systems, Inc., 250 Crossways Park Drive, Woodbury, NY 11797 USA  (800) 553-3332 (USA Only)

www.infinitysystems.com 

*Trademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc.

Infinity is a registered trademark of Infinity Systems, Inc. Part No.: ENTRA5OM4/02

Reviews: