16
Extend the Length of the Bed from 80” to 84”
The bed length can
be extended by 2” on either end of the bed. To extend the bed
length:
1.
Loosen the two black knobs located on the underside of the bed frame securing
the head/foot board brackets. (Refer to Section 3)
2.
Pull the head/foot board brackets away from the bed squarely with both hands
until the brackets latch onto the bed frame. The distance is also marked on the
brackets. Tighten the securing knobs once the brackets are extended.
3.
Adjust the bed end mattress retention frame to the required position. The
extension length is marked on the bed platform.
Extend the Width of the Bed from 35
” to
42
” or
48
”
1.
Under each deck section there are two springed plungers. Pulled down the
springed plungers and at the same time slide out the extension piece to the
required length. There should be an audible click indicating that the extension
piece is locked in place.
2.
Repeat the same procedure on all bed sections and on both sides of the bed.
3.
Adjust the mattress retainers accordingly.
