- 3 -
I
NSTALLATION
Figure 3.
Mounting the 605cs woofer in standard speaker
locations.
I
NSTALLATION
Figure 5A.
Mounting the tweeter using the I-Mount
™
(pat. 5,859,917) flush-mounting kit.
Note: Aim the tweeter at the listening position by
sliding the stud in the groove on the back of the
tweeter cup and rotating the entire assembly in
the mounting surface. Lock the tweeter in place,
using the small retaining nut and the large plastic
mounting nut.
Figure 5B.
Figure 4.
Mounting the 605cs in 165mm speaker locations.
I
NSTALLATION
Figure 6.
Mounting the tweeter using the I-Mount™
surface-mounting kit.
I
NSTALLATION
Connect the speakers to the crossover and
the crossover to the amplifier, observing proper
polarity.
Note: If you have purchased the 105t as a separate
component, connect the tweeter with the in-line
crossover to the amplifier, observing the proper
polarity.
Figure 7A.
Figure 7B.
SLIDE UP OR DOWN
TO ADJUST TWEETER
ANGLE
ROTATE TO AIM
ANGLED TWEETER
TO LISTENER
TIGHTEN NUT AND
WASHER TO LOCK
THE ANGLE SETTINGS
1
2
3
SMALL LUG
IS NEGATIVE (–)
BIG LUG IS
POSITIVE (+)
TO AMPLIFIER
SPEAKER OUTPUTS TO MID-BASS
TO TWEETER
C WIRE HERE
TO REDUCE TWEETER
OUTPUT LEVEL
+
+
+
_
_
_
TW
WF
IN
-
+
-
+
-
+ -3dB
p/s 050
2ohm
2ohm
0.15mH
0.22mH
5.4uF
6.8uF
1
2
–
+
1
2