- 3 -
+ IN -
+0db +3dB
+ W -
+ T -
To woofer
To tweeter
To amplifier
speaker output
Tweeter level
+3dB
Tweeter level
0dB
KX00
W
OOFER
I
NSTALLATION
Figure 3
Fasten the midrange through the plastic grille
tray with the screws and clips provided.
Press the metal mesh in place in the tray.
Mounting the tweeter using the I-Mount
surface-mounting kit.
Mounting the tweeter using the I-Mount
flush-mounting kit.
Figure 6
Aim the tweeter at the listening position by
sliding the stud in the groove on the back of the
tweeter cup and rotating the entire assembly in
the mounting surface. Lock the tweeter in place
using the small retaining nut and the large plastic
mounting nut.
T
WEETER
I
NSTALLATION
1
2
SLIDE UP OR DOWN
TO ADJUST TWEETER
ANGLE
ROTATE TO AIM
ANGLED TWEETER
TO LISTENER
TIGHTEN NUT AND
WASHER TO LOCK
THE ANGLE SETTINGS
1
2
3
1
2
–
+
Figure 4
Figure 5
W
IRE
C
ODES
Figure 2
Connect the speakers and amplifier
to the crossover as shown.
Kappa40.2/50.2/60.2/652.2csOM 1/5/00 11:11 AM Page 3