Infinity 200010, Manual

Page: 27 / 52

26
Ordercode: 200010
TS-260C7 Profile Engine
8. DMX Lost Mode
In this menu you can determine the behaviour of the Profile Engine in case of a DMX failure.
The display will blink (only if Display set to “Auto Off”).
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 3 options:
The device will fall back on the last properly working DMX signal from before the
DMX signal error, which ensures undisrupted performance.
The device will black out in case of a DMX failure.
The device will fall back on the last working settings from Manual mode.
04)
Press the ENTER button to confirm.
9. Fan Mode
In this menu you can control the speed of the fan.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the speed of the fan. Choose one of the 3 options
.
04) Press the ENTER button to confirm.
10. PWM Frequency
In this menu you can set the PWM frequency.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the device’s PWM frequency. The adjustment range is between
, in increments of 10Hz.
04) Press the ENTER button to confirm.
11. Calibration
In this menu you can enable or disable the color calibration software.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose between and .
04) If you choose , the color calibration software will be activated (recommended).
05) Press the ENTER button to confirm.