Infiniton PAC-F75, Instruction Manual

Page: 39 / 73

14
Cooling
Mode
Operation
·
Under cooling mode, cooling indicator will light on.
·
Temperature Setting is from 16
℃
to 30
℃
.
·
Press Fan Speed Button to choose from low/ high fan speed.
Fan Mode
·
Under Fan mode, indicator will be on.
·
Press Fan Speed Button to choose from low/ high fan speed.
·
Temperature cannot be set under this mode.
Dry Mode
·
Dry indicator will be on under this mode.
·
Remove water plug (see right), insert one end of pipe to
drainage hose
，
the other end would be in water tank or
water channel.
·
If ambient Temp.
≥17 ℃（
or 62
℉）
compressor starts and
follow below sequence: if ambient Temp.
≤15 ℃
(or 59
℉ ）
compressor stops
；
when it reaches ≥17
℃，
compressor
starts again.
（
There would be a 3-min delay for
Compressor protection
）
·
Fan runs with a fixed low speed.
·
Temp. is fixed.
(Notes
：
Under dry mode
，
please dismantle air exhaust duct
，
or
performance will be affected and water full alarm
“
FL
”
will buzz.)
Heating Mode (not available for cooling only model)
·
Under this mode, heating indicator will light up.
·
Press UP/DOWN button to select Temp. between 16
℃
and 30
℃
.
·
Press Fan Speed button to set low/ high speed.