WARNING:
In order to avoid overheating, do not cover the heater.
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath, a
shower or a swimming pool.
WARNING:
This heater is not equipped with a device to control the
room temperature. Do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
Technical specifications
Rated Voltage: 220-240V~ 50-60Hz
Rated Power: 1800-2000W
OPERATION OF YOUR HEATER
·Remove the heater from all packaging and place it in desired location.
·Ensure that there is a safe area between the heater and furniture,curtains,etc-50cm safe
area form top and sides and 120cm safe area in front.
·Unwind the Power Cord and plug it into the Power Outlet.
·To activate the heater ,turn the knob clock-wise to the
‘ ’
position for cool air. Turn knob
to ‘I’ for low power, ’II’ for maximum power.
AUTO SATETY SHUT OFF
The heater has a built-in safety device, which will switch the heater OFF in case of
accidental over heating. To reset the heater, follow the next steps:
·Turn the control setting to the ‘O’ position.
·Unplug the heater and wait 5-10minutes for the unit to cool down.
·After the unit has cooled, plug it in and operate normally.
·Turn selector switch into desired position(Fan, Low or High).
·Turn the thermostat switch to the desired temperature position.
·When you feel the room temperature comfortable, turn the thermostat switch
anti-clockwise slowly to the minimal direction until the appliance switches off.
