•
Don’t use this heater in the immediate surroundings of a bath, a shower
or a swimming pool. Never locate the heater where it may fall into the
bath tub or other water container.
•
This heater is hot when in use. To avoid burns and personal injury, do
not let bare skin touch hot surfaces. If provided, use handles when
moving the product.
•
Be sure that no other appliances are in use on the same electrical circuit
as your product as an overload can occur.
•
Do not allow clothing to come too close to the heating elements as there
may be a risk of fire.
•
The heater should not be used in a room of which the floor area is less
than 5 m².
Parts
1.
Power switch and middle tube switch
2.
Lower tube power switch
3.
Upper tube switch
4.
Turning switch
5.
Upper lid
6.
Lattice net
7.
Halogen heating tube
8.
Reflector
9.
Lattice net
10.
Grill
11.
Body frame
12.
Base plate
13.
Handle
14.
Power cord and plug
15.
Butterfly nuts
16.
Tip-over safety switch
17.
Power cord guide
Assembly
•
Remove butterfly nuts from the base.
•
Pull the power cable through the base plate and place the cable through
the cable channel to ensure that it is secure.
Warning: DO NOT COVER
