4
8
3UREOHP
3RVVLEOHFDXVH
6ROXWLRQ
Appliance
dose not work
Temperature regulation
knob is set at number “0”.
Set the knob at other number to
switch on the appliance.
Mains plug is not
plugged in or is loose
Insert mains plug.
Fuse has blown or is
defective
Check fuse, replace if necessary.
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
The food is too
warm.
Temperature is not
properly adjusted.
Please look in the initial Temperature
Setting section.
Door was open for an
extended period.
Open the door only as long as
necessary.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
Turn the temperature regulation
to a colder setting temporarily.
The appliance is near a
heat source.
Please look in the installation
location section.
Appliance
cools too
much
Temperature is set too cold.
Turn the temperature regulation knob
to a warmer setting temporarily.
Unusual noises
Appliance is not level.
Re-adjust the feet.
The appliance is touching
the wall or other objects.
Move the appliance slightly.
A component, e.g. a
pipe, on the rear of the
appliance is touching
another part of the
appliance or the wall.
If necessary, carefully bend the
component out of the way.
Water on the
floor
Water drain hole is blocked.
See the Cleaning and Care section.
If the malfunction shows again, contact the Service Center.
