Drawing B
Drawing C
3.
Get access to the set-up mode of TIME/DISTANCE/CALORIES/TARGET PULSE.
When you are in each set-up mode. For instance the time set-up, when the time value
is blinking, you can press "SET" button to adjust the number. Press "Mode" button for
confirmation and skip to next set-up. The set-up of DISTANCE & CALORIES is the
same as TIME set-up.
4.
When you are in Target PULSE mode, the main screen will show "AGE", PULSE screen
show "TARGET value (220-AGE)". At the time you can press "SET" button to change the
value of AGE and TARGET shown as "Drawing D". When the set-up is completed, press
"MODE" button to confirm and skip tp TIME screen. Continuously press "MODE" button
will act this circle. If you do not enter the RPM and PULSE signal or manual set-up time
over 4 minutes in this mode, it will be skip to SLEEP mode shown as "Drawing E".
Drawing D
Drawing E
5.
After entering RPM value, and setting up the TIME, DISTANCE, CALORIES. In SCAN
mode shown as "Drawing F". RPM/SPEED/TM/DIST/CAL/PULSE will skip to display
every 6 seconds. The order is as follows.
Drawing F
6.
You can also press "Mode" button to select single function display except RPM &
SPEED function. The RPM & SPEED function will switch display.
7.
Except the SPEED / RPM cannot set up other function mode. For example when
set-up is completed of TIME, DISTANCE, CALORIES, TARGET H.R., enter and
set up the RPM value will count down to 00:00 and produce 4 times "Bi" sound for
8 seconds, then the value will be counting up from 00:00.
8. RECOVERY
(1) When press "RECOVERY" button, the RECOVERY function will work. At this
time only PULSE and TIME is working, other function will not be displayed, and the
Sensor Input is not available. TIME start to count down from "00:60". Pulse signal
will be blinking according to user's pulse. When count down to "0", it will show F1~F6.
(2) LCD display as follows: (RECOVERY start condition & end condition)
