14
LR4 User Manual
Chapter 3 Additional Information
3.4 Vibrate Alert
LR4 has a vibrate alert to discretely inform:
•
The final three minutes of the timer; three short vibrations
•
The final minute of the timer; short vibration
•
When the timer reaches zero; long vibration
3.5 Frequency Search
Should the receiver not respond to the controller after installing the driver
See “Installing the
Wireless USB Receiver” on page 7
, reset the transmission and reception frequency
between controller and wireless USB receiver using the following procedure.
1
Plug the wireless USB receiver into an available USB port.
2
Press the
Connect Key
on the wireless USB receiver.
The
Status LED
starts flashing.
3
Remove the battery on the LR4.
4
Press the
Power button
while re-install the battery.
5
Wait till the boot-up completes and then release the
Power button
.
The
Status LED
on the wireless USB receiver stops flashing.
6
When the
Status LED
stops flashing, the wireless transmission is reset.
Now the LR4 is ready to use.
