FP100780-1_revG.docx
Page
4
of
11
90cm/36 in & 120cm/48 in
Antenna Mounting Procedure
The following describes the general installation practices that apply to the antenna mount and
antenna assembly.
IMPORTANT!
Read instructions completely before assembling or installing the antenna. This assembly
requires qualified personnel familiar with microwave antenna assembly and installation
.
Unpacking and Preparation
Carefully unpack the antenna assembly and mount parts from its shipping container.
CAUTION!
The reflector has been formed to a very close tolerance parabolic shape. Careful handling
and assembly is required to avoid denting the reflector, which would degrade the
antenna’s performance.
List of Tools
(1) 7/16” Wrench
(2) 9/16” Wrenches
(1) 3/4” Wrench
(1) 1” Wrench
#2 Phillips head screw driver
