background image

User Manual | 

7mm Coaxial Calibration Kits 

 

 

2

 

   

 

 

 

 

 

 

 

 

       

pasternack.com

 

 

Warranty 

Pasternack hardware products

 are warrantied against defects in materials and workmanship for a period 

of one year from the date of shipment. During the warranty period, Pasternack will, at its option, either repair 

or replace products which prove to be defective. 

Pasternack software products

 are warrantied against defects in material and workmanship of the media on 

which the product is supplied for a period of ninety (90) days from the date of shipment. Pasternack also 

warranties that the product shall operate substantially in accordance with published specifications during 

the same warranty period. During the warranty period, Pasternack will, at its option, either repair or replace 

products which prove to be defective. Pasternack does not warranty that the operation of the product shall 

be uninterrupted or error-free. 
For warranty service or repair, all products must be returned to Pasternack and must be issued a return 

authorization number by Pasternack prior to shipment. Buyer shall prepay shipping charges to Pasternack. 

Obligation is limited to the original Buyer. 

Limitation of Warranty 

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by 

the Buyer, unauthorized modification or misuse, operation outside of the environmental specifications for 

the product, or wear resulting from normal use. No other warranty is expressed or implied. Pasternack 

specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. 
The remedies provided herein are the Buyer’s sole and exclusive remedies. Pasternack shall not be liable 

for any direct, indirect, special, incidental, or consequential damages whatsoever (including,  without 

limitation, damages for loss of business profits, business interruption, loss of business information, or any 

other financial loss) arising out of the Buyer’s use of or inability to use the product, even if Pasternack or 

an authorized Pasternack dealer has been advised of the possibility of such damages. 

 

 

 

Summary of Contents for PE PASTERNACK PE5CK1023











Reviews: