7
EN
KIT
SYSTEM PROGRAMMING
There are two types of configurations:
1) Using an internal video door when you first start is recommended for
small building
2) For systems of higher dimensions can be a system configuration
from a PC by software
To be connected PC to any RJ45 port of InfinitePlay system by patch
cords.
IIP SETUP INSTALLER:
KEY PASSWORD: 000000
Setup by video door phone
VIDEO DOOR PHONE ID ( ten digit code ):
Building 01
Floor 103
Apartment 050
Internal device 04
PHASES OF CONFIGURATION:
The configuration steps of the system are divided into only 5
points:
1.BASIC SETTINGS
2.ENTRANCE PANEL
3.POWER SUPPLY
4.VIDEO DOOR PHONE
5.MAPPING ENTRANCE PANEL
1. BASIC SETTINGS
To be programmed the basic parameters for system
CONCIERGE ( yes / no )
SOS PANIC BUTTON ( yes / no )
VIDEO DOOR PHNE VISIBILITY SYSTEM( all video intercom device/
only master video intercom device )
SYSTEM SETTING TIME (GMT 00)
SETUP INFINITEPLAY SYSTEM LANGUAGE
CHANGE PASSWORD OF SYSTEM ( default 000000 )
2. ENTRANCE PANEL
To be programmed all parameters of entrance panel in the system
IDENTIFICATION NUMBER (Mac address out door unit )=
B4669800F3
CUSTOM ID NUMBER: from 1 to 200 unit
NAME ENTRACE PANEL: Regent St
SUBTYPE: Choose the subtype of call (1-4 touch buttons, list on LCD
display, buttons on LCD display )
ANSWER TIME (1 to 255 s)
Default value 30 s
CONVERSATION TIME (1 to 255 s)
Default value 120 s
SELF-START TIME(1 to 255 s)
Default value 30 s
AUDIO INDOOR-OUTDOOR (0% to 100%)
Default value 50%
ENTRANCE PANEL RINGTONE REPETITION ( yes / no )
Default value is yes
SAVE SETTINGS BEFORE YOU GET OUT OF SETUP
BACK
SAVE
