Infinite Play Series NVR User'S Installation And Operation Manual Download Page 49

Page: 49 / 72

INFINITE PLAY

User Name:

Apply the email server user name.

Password:

Input the password corresponding to the user.

Sender:

Set the senders’ email address.

Receiver:

Send the email to appointed receivers when the alarm is triggered. You can set three

receivers maximum .

Snapshot

: Enable or disable alarm snapshot.

【

DDNS

】

It is the abbreviation of dynamic domain name server.

DDNS Type:

choose ddns service provider.

User name

：

Provide the account registered by DDNS.

Password

：

Provide the password registered by DDNS.

When the DDNS is successfully configured and start, you can connect the domain name in the IE

address column to visit.

Domain name

：

Provide the domain name registered by DDNS.

Note

：

The DNS setup must be configured correctly in the network setup.

Picture 4.23 DDNS setup

【

FTP setup

】

FTP is available only when alarms happen, or alarm activates record and snapshot, it will

upload related snapshot pictures to FTP server.

Picture 4.24 FTP setup

Summary of Contents for Series NVR









































































Search results

Summary of Contents for Series NVR

Reviews:

Related manuals for Series NVR

Brands by name

Popular brands

Infinite Play Series NVR, User'S Installation And Operation Manual

Search results

Summary of Contents for Series NVR

Reviews:

Related manuals for Series NVR

Brands by name

Popular brands