manualshive.com logo in svg

Infinite Peripherals PP-50, Developer'S Manual, Page: 12 / 35

Share
Download
Infinite Peripherals PP-50 Developer'S Manual Download Page 12

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

..

..

..

..

.

Infinite Peripherals, Inc.

Page 11

www.ipcprint.com
Version 2.00

  

Pocket PC Devices

Support for PocketPC devices come in the form of PocketPC (ARM) driver/SDK.   This
Driver/SDK aids software engineers in the development of PocketPC applications that
can be used with the PP-50 thermal printer.

PocketPC iPAQ Driver/SDK (ARM):

The PocketPC driver follows the Window guideline for printer drivers with one
exception.  “Page size” – the page size it is calculated as proportional to given
size, for example A4 size is treated as page with dimensions 48mm x 68 mm.
User can obtain information about the driver via dc function GetDeviceCaps.

The driver incorporates functions such as PASSTHROUGH that enables the
developers to send printer resident commands to the PP-50 through the
driver.  Other commands such as the READCARD enable applications to
retrieve data from the magnetic card reader.

Note:  For more information on using the PocketPC driver, refer to the

ReferencePC.htm files included with the driver or SDK.

Summary of Contents for PP-50




































Reviews:

No comments