InfiniSource ETC 100, Hardware Manual

Page: 96 / 234

84 Infinisource
Connection Type
This option lets you configure whether your clock will connect to a
wireless access point (infrastructure), or computer-to-clock (AD HOC).
Security Settings
This option allows you to configure network authentication options.
Show Settings
This menu displays the clock’s current wireless settings.
Show Settings
This option displays the clock’s current IP Address, Subnet Mask and
Gateway settings.
Finger ID
This menu contains the time clock’s finger template settings. See
“Enrolling Finger Templates” on page 67 for instructions on this menu.
Set Date/Time
This option allows you to set the date and time on the clock manually
from the clock keypad.
When you select this option, you receive the following prompt:
CURR DATE: XX/XX/XXXX
MONTH:
• Enter a number between 1 and 12 to denote the desired month and
press <ENTER>. “DAY” appears below the specified month set-
ting.
• Enter the desired date and press <ENTER>. “YEAR” appears
below the specified day setting.
• Enter the desired year and press <ENTER>.
The current time is displayed at the top of the screen. The following
prompt appears:
ENTER TIME AS hhmmss
In 24-hour format, enter the desired time as “HH/MM/SS” and press
<ENTER>. For example, a time of four o’clock p.m. would be entered
as “160000.”