InfiniSource ETC 100, Hardware Manual

Page: 79 / 234

TimeForce II Hardware Guide 67
Using the Model IQ 1000 IntelliClock
Using the IQ 1000 Clock
The IQ 1000 is our most advanced model of clock with many options
and features. It can be used to restrict employee punching, allowing
employees to punch at the clock during their scheduled shift times only.
This model also allows your employees to view various information at
the clock itself such as accrual totals, scheduled shift times and the date
and time of their last clock entry.
Enrolling Finger Templates
Note: The Biometric unit on an IQ 1000 is optional. The following
instructions only apply if you purchased a clock with a Biometric unit.
1. Press the <MENU> button on the time clock keypad. A screen
appears which reads:
MAIN SYSTEM MENU
SELECT MENU FUNCTION
ADMIN PERSONAL
2. Click on the grey button directly below the “ADMIN” option (at
the very top of the clock keypad). The following message appears:
ENTER YOUR CARD #
3. Enter the card number of a user that has access to the “Admin”
clock features and press the <ENTER> key on the clock keypad.
Note: The default administrator username is “8888.”
The following message appears:
ENTER PIN:
4. Enter the password for the given card number and press the
<ENTER> key on the clock keypad.
Note: The default administrator password is “1111.”
5. The main menu appears with several options. Press 1 for System
Maintenance.
6. Press 4 for Finger ID.